Importing your favorite ship hulls per request (1 a month)

    Joined
    Jan 29, 2015
    Messages
    191
    Reaction score
    284
    • Community Content - Bronze 2
    • Purchased!
    • Legacy Citizen 3
    I've been getting myself familiar with importing hulls into StarMade and have finally figured out a method to generate awesome hulls (more then just using smedit which isn't very good at voxelizing 3D models on its own) which i will gladly disclose for any whom might be interested.

    With that in mind. I am willing to start accepting request for your favorite Sci-fi ships or 3D models to generate for you and post to the dock.
    Just leave a comment here and i will try to get it in for you within a day or two. I ask that you provide the..

    Ship name (or 3D model if you have it)
    Length
    block type and block color

    Please don't go over 1000 meters in length as it is just too much of a pain to splice back together to get two identical sides. For doing so my only request is that you leave an honest review of the hull good or bad and maybe a mention if you post the finished ship to the dock.. I hope to see these ships finished in the future.


    Here are a some (not all) of the hulls i have imported in already.
    Star Trek: Sovereign Class Hull (Enterprise E)
    Saber Class hull requested by _Naperone_
    Ambassador Class Star Trek Hull
    Steamrunner Class ST hull
    Arbiter Battlecruiser from STO
    The Reaper Sovereign (hull)
    Klingon Duvqu Heavy (hull)
    Imperial Cobra (HULL)
    Romulan Warbird: Carrier (hull)
    Jem'hadar Dreadnaught (hull)
    Intrepid class 1:1 scale (voyager) (hull)
    Imperial Dreadnaught (BFGA) HULL
    Star Trek: Akira class (hull)
     
    Last edited:
    Joined
    Feb 26, 2014
    Messages
    270
    Reaction score
    54
    • Purchased!
    • Community Content - Bronze 1
    • Legacy Citizen 4
    Hello can i request that you do the star trek Steamrunner class Since it is a ship that i have really wanted in starmade but have been unable to get one.

    if possible
    Length 375 m
    Height 79 m
    width 270 m

    You might be able to get the model from 1:1 Star Trek fleet (no interiors) Minecraft Project since this has a lot of ships from star trek already in block form.

    Or if you have too much trouble with that a Challenger class


    Length 394 m
    Height 115 m
    width 264 m
     
    Joined
    Jun 19, 2013
    Messages
    199
    Reaction score
    247
    • Legacy Citizen 6
    • Community Content - Bronze 2
    • Purchased!
    I saw that you had a post in the community content section offering to import some ships if we had the specifications for them.

    I was hoping maybe you'd be able to get the Sovereign class reaper from the mass effect series. I'm not sure where one would get the model for it though but it would be ideally 700m for starmade.



    If it's possible, I'd like one as you see here, where the legs are more closed so they are suited as to be flying!
     
    Joined
    Feb 2, 2015
    Messages
    32
    Reaction score
    43
    • Legacy Citizen 2
    • Community Content - Bronze 2
    If you could...
    USS Enterprise C (Ambassador Class); 526 m long; white standard armor.
    Please make sure that it is completely hollow; you should be able to find a model here:
    1:1 Star Trek fleet (no interiors) Minecraft Project
    Or here, but I would prefer the one above if possible:
    https://3dwarehouse.sketchup.com/model.html?id=ad34c40c-bfbc-4833-8b8f-cf47f17fbd3c
    Thanks in advance! I would do it myself, but my computer is a bit too weak for SMEdit to do anything over 300m, and I don't know your method.
     
    Joined
    Jan 29, 2015
    Messages
    191
    Reaction score
    284
    • Community Content - Bronze 2
    • Purchased!
    • Legacy Citizen 3
    I've been getting myself familiar with importing hulls into StarMade and have finally figured out a method to generate awesome hulls which i will gladly disclose for any whom might be interested. With that in mind. I am willing to start accepting request for your favorite Sci-fi ships or 3D models to generate for you and post to the dock.
    Just leave a comment here and i will try to get it in for you within a day or two. I ask that you provide the..

    Ship name (or 3D model if you have it)
    Length
    block type and block color

    Please don't go over 1000 meters in length as it is just too much of a pain to splice back together to get two identical sides. For doing so my only request is that you leave an honest review of the hull good or bad and maybe a mention if you post the finished ship to the dock.. I hope to see these ships finished in the future.


    Here are a couple i have loaded in already per request.
    Star Trek: Sovereign Class Hull (Enterprise E)
    Saber Class hull requested by _Naperone_
    If you could...
    USS Enterprise C (Ambassador Class); 526 m long; white standard armor.
    Please make sure that it is completely hollow; you should be able to find a model here:
    1:1 Star Trek fleet (no interiors) Minecraft Project
    Or here, but I would prefer the one above if possible:
    https://3dwarehouse.sketchup.com/model.html?id=ad34c40c-bfbc-4833-8b8f-cf47f17fbd3c
    Thanks in advance! I would do it myself, but my computer is a bit too weak for SMEdit to do anything over 300m, and I don't know your method.
    Those are some nice shematics. I'll check them out tonight and see what i can do.
    [doublepost=1470884132,1470881144][/doublepost]
    I saw that you had a post in the community content section offering to import some ships if we had the specifications for them.

    I was hoping maybe you'd be able to get the Sovereign class reaper from the mass effect series. I'm not sure where one would get the model for it though but it would be ideally 700m for starmade.



    If it's possible, I'd like one as you see here, where the legs are more closed so they are suited as to be flying!
    I have two models here in 3DS> Capture.PNG . The one on the top is Sovereign from ME1 while the one on the bottom is Harbinger from ME2. I was seeing if they would suit you or if i should try a different one like this reaper.PNG
     
    Joined
    Feb 27, 2014
    Messages
    1,074
    Reaction score
    502
    • Purchased!
    • Legacy Citizen 4
    • Top Forum Contributor
    Wow this looks amazing :D
    I would be fascinated at how you go about doing this
     
    Joined
    Jan 29, 2015
    Messages
    191
    Reaction score
    284
    • Community Content - Bronze 2
    • Purchased!
    • Legacy Citizen 3
    If you could...
    USS Enterprise C
    I've got yours in and ready to be downloaded here> Ambassador Class Star Trek Hull

    I didn't use white blocks though because it would have removed all of the details that the original creator of this schematic added. I was able to get it hollowed out however.. He actually had nearly every level on this ship some how lol.. awesome.
    [doublepost=1470889249,1470887964][/doublepost]
    Wow this looks amazing :D
    I would be fascinated at how you go about doing this
    There is a method to making these hulls high quality like this. Basically you (don't) use smedit to voxelize the hulls.. But instead something superior like a plug in for 3DS MAX called Voxelator among many others, or Binvox is a decent one for converting OBJ and STL file types.

    They produce very accurate representations of the models vs smedit which tends to be pretty sloppy when it tries to voxelize the model..

    The other trick is that i use 3DS to remove interiors or dangly bits to remove any artifacts they will produce as some 3D models will have interiors which can cause issues during conversion from time to time. If you know it doesn't have any interior then you should be fine just voxelising it.

    I then use smedit to add block type/color preference and convert the model into a blue print that SM can use.

    Then i cut the ship in half and then put up a symmetry plane so that i can get both sides identical to make it easier to work with later on.

    To make putting the two halves back together easier. You use exact dimensions of the ship to create your copy box. Then the horizontel plane (left to right) needs to be exactly half the ships actual width. Then once you have a copy of half the ship. You set down a core. lay out a line of blocks half the width of the ship to one side. put another line of blocks the length of the ship going backwards to give you room to get your core placement just right. Then paste it once you fiddle around getting the core where you want. But bear in mind that larger ship copy/pasting will drag your FPS through the ringer.

    I try to place the core at that time as close to the bridge as possible and put it facing the right direction of course (which depending on the 3d model doesn't always start off that way and you will want to make certain that it is).

    But that is my method. It is a pain in the butt. but i have the spare time for now.
    [doublepost=1470890645][/doublepost]
    Hello can i request that you do the star trek Steamrunner class Since it is a ship that i have really wanted in starmade but have been unable to get one.
    I've got your hull in pal. I hope you enjoy it and don't forget to leave a review Steamrunner Class ST hull
     
    Last edited:
    • Like
    Reactions: Dire Venom
    Joined
    Jun 19, 2013
    Messages
    199
    Reaction score
    247
    • Legacy Citizen 6
    • Community Content - Bronze 2
    • Purchased!
    Those are some nice shematics. I'll check them out tonight and see what i can do.
    [doublepost=1470884132,1470881144][/doublepost]

    I have two models here in 3DS> View attachment 30559 . The one on the top is Sovereign from ME1 while the one on the bottom is Harbinger from ME2. I was seeing if they would suit you or if i should try a different one like this View attachment 30560
    In the first picture you had shown, the bottom of the two models in the photo! :D
     
    Joined
    Feb 16, 2014
    Messages
    256
    Reaction score
    73
    Where do you find the models for these? The converted ships come out looking amazing.

    Would you be able to do an Interdictor Class Cruiser from the KOTOR series with a length of 600m?
     
    Joined
    Aug 27, 2015
    Messages
    4
    Reaction score
    5
    Hi would it be possible for you to make the hull of the USS Relativity, a Wells class timeship from Star Trek Voyager. It is approximately 374.5 meters long, and i would like it with white advanced Armour if that would be possible.
     

    Attachments

    Joined
    Aug 3, 2013
    Messages
    24
    Reaction score
    11
    • Purchased!
    If you are still doing these imports by request I would love to see any one of 4 podracers from the Star wars universe, that of Boles Roor, Neva Kee, Gasgano, or Elan Mak, any of these 4 would be awesome, due to the old podracing game for the nintendo 64 having some fond memories to it, and these 4 pods in particular. So if you can import any of these 4 I would be grateful, as for the color, I would hope it could be as close to the movies as you could get it, as for size of the ship, 200 long would look good and then get height and width to match it best, or if you think this does not look that good, then feel free to pick a size for yourself. Thank you for considering this even if you are unable to make any of the 4 look good in game
     
    Joined
    Jan 29, 2015
    Messages
    191
    Reaction score
    284
    • Community Content - Bronze 2
    • Purchased!
    • Legacy Citizen 3
    Hi would it be possible for you to make the hull of the USS Relativity, a Wells class timeship from Star Trek Voyager. It is approximately 374.5 meters long, and i would like it with white advanced Armour if that would be possible.
    i will.. But after i fix the core position on the ambassador and then repost it. I would like for you to review it again with the core in the right direction.. (i really thought it was) but it was late and i was sleepy.
     
    Joined
    Jan 29, 2015
    Messages
    191
    Reaction score
    284
    • Community Content - Bronze 2
    • Purchased!
    • Legacy Citizen 3
    Where do you find the models for these? The converted ships come out looking amazing.

    Would you be able to do an Interdictor Class Cruiser from the KOTOR series with a length of 600m?
    yeah.. i have a few other ships in the pipe line already to get done. but i will get it in within a day or two. So keep watch of the thread for yours.
     
    Joined
    Jan 29, 2015
    Messages
    191
    Reaction score
    284
    • Community Content - Bronze 2
    • Purchased!
    • Legacy Citizen 3
    I told some of you that i would soon have access to the entire library of star trek online ships.. Well.. I do now and they are very detailed and extremely awesome models. here is a peek at one of the klingon ships of the dozens of types they have alone.

    starmade-screenshot-0205.png
     
    Joined
    Feb 26, 2014
    Messages
    270
    Reaction score
    54
    • Purchased!
    • Community Content - Bronze 1
    • Legacy Citizen 4
    They look really cool and quite good works of them what is the klingon ship since i do not recognize it even from STO and i hope you do more there are not enough star trek ships in starmade.
     
    Joined
    Jan 29, 2015
    Messages
    191
    Reaction score
    284
    • Community Content - Bronze 2
    • Purchased!
    • Legacy Citizen 3
    In the first picture you had shown, the bottom of the two models in the photo! :D
    I am getting to it annubis. The game just keeps crashing when i try to put them back together. So i might have to give this model to you without completely identical sides, albeit they will be pretty close if i do. But im going to try a couple other things beforehand.
    [doublepost=1470935462,1470935079][/doublepost]
    They look really cool and quite good works of them what is the klingon ship since i do not recognize it even from STO and i hope you do more there are not enough star trek ships in starmade.
    It is of the Raptor class. Forget which one exactly as there are about a dozen in that class on STO... There are so many ships in that game that every soul who plays StarMade currently could be flying in there own unique ST ship with some more to spare for new folks later on..
     
    • Like
    Reactions: Anubis Evo
    Joined
    Sep 5, 2013
    Messages
    58
    Reaction score
    26
    • Legacy Citizen 5
    They look really cool and quite good works of them what is the klingon ship since i do not recognize it even from STO and i hope you do more there are not enough star trek ships in starmade.
    the klingon ship is the mogh or the mat'ha raptor if i am not mistaken i play STO almost daily so i see these ships on a constant basis
    [doublepost=1470953475,1470953442][/doublepost]
    I told some of you that i would soon have access to the entire library of star trek online ships.. Well.. I do now and they are very detailed and extremely awesome models. here is a peek at one of the klingon ships of the dozens of types they have alone.

    View attachment 30596
    nice Achilles in the background to bad its not the genuine one from bridge commander

    Btw awesome work so far, from one trek builder to another (SMedit or not)
     
    Joined
    Feb 26, 2014
    Messages
    270
    Reaction score
    54
    • Purchased!
    • Community Content - Bronze 1
    • Legacy Citizen 4
    Thanks for the info i am just recently restarting up a klingon character but i have been playing a lot as well but i mostly play feds so the info is useful.
     
    Joined
    Sep 5, 2013
    Messages
    58
    Reaction score
    26
    • Legacy Citizen 5
    Thanks for the info i am just recently restarting up a klingon character but i have been playing a lot as well but i mostly play feds so the info is useful.
    No problom if you want add me @Pertune is my STO Handle ( but i dont play klingon )
     
    Joined
    Mar 10, 2016
    Messages
    2
    Reaction score
    1
    If you have time, I'd love a version any of the following ships:
    Avenger Battlecruiser, Arbiter Battlecruiser or Eclipse Intel Cruiser.
    I know the Eclipse is supposed to be 982m long...but if you can cut it down to 600 or less that would be awesome.
    Thanks so much for doing this man. Oh and for hull, what ever they have when loaded is fine.

    EDIT---- crap for got to say the length of the battlecruisers is 425 for 1:1...idiot me and forgetting stuff.
     
    Last edited: