Devblog 18th June 2017

    Reilly Reese

    #1 Top Forum Poster & Raiben Jackpot Winner
    Joined
    Oct 13, 2013
    Messages
    5,140
    Reaction score
    1,365
    • Legacy Citizen 8
    • Thinking Positive
    • Purchased!
    Now if only block rotation was dynamic to your POV
     
    • Like
    Reactions: Criss

    Lancake

    Head of Testing
    Joined
    Aug 20, 2013
    Messages
    794
    Reaction score
    560
    • Schine
    • Tester
    3. It took me a sec to figure out how the new fill tool works because it doesn't work properly with the 'reverse place/break block button' option in the options menu. For anyone who's having issues using the new fill tool, try disabling that first. :P
    Seems to work fine for me in either mode, remove mode just flips the box which would only affect "Fill Tool" as that one sets the location where to start the filling. Remove mode doesn't affect it though.

    The "Remove mode" button is inversed right now (bug), maybe that caused some confusion?

    Where's the reset button for the brush size? Having to rezero the sliders all the time SUX! It would be a major improvement to efficiency if you just added a reset button. If you add a slider you should add a reset along with it....(also being able to choose and place a blueprint of a turret via the 'create docking' menu please.)
    Is that really needed? A reset button next to the slider, or clicking in the left most area of a slider, would both do the same thing. And clicking in the left most part of a slider works so to me this seems to be unnecessary.

    quick question, with the fill tool would you be able to set the build helper to resrtict build area and then just fill the outline?
    Not in the current dev but most likely in the next few builds. It could even be seen as a bug as filling is a "build instruction" yet the "restrict building to helper" is ignored for the fill tool only.

    I can't undo a 'Do Fill'
    I can undo and redo it just fine. There's a bug with it that after an undo, the next "Do Fill" picks off from the last place, and not from where it was after the undo although that doesn't seem to be what you imply.
    [doublepost=1497862465,1497862345][/doublepost]
    Now if only block rotation was dynamic to your POV
    Meaning blocks would change rotation depending from what angle you're looking at?
    I see this work fine for single block rotation, but what happens if you need to place down a large amount of blocks of rotation
    and you need to rotate your camera several times in order to see/fill all the spots? Doesn't that mean your rotation would constantly change during that process?​
     
    Joined
    Jun 29, 2016
    Messages
    80
    Reaction score
    39
    Hmm... I already think that Starmade have the best building system
    I don't know if I would go that far. The 'exploded view' possible in another block building game is super, super useful - It's one thing I've really missed when playing StarMade - but oh, the performance hit. With as many blocks as people build with in this game, it's probably not practical, as every single block gets rendered.

    Still, StarMade's new fill mode looks more advanced than in that game - at least at the time I played it. Certainly a welcome feature.
     
    • Like
    Reactions: MacThule
    Joined
    Sep 18, 2014
    Messages
    621
    Reaction score
    448
    I still don't see the utility of the new rails blocs right now... Is there something else planned for theses blocs or you'll leave it as it is right now ?
     

    Reilly Reese

    #1 Top Forum Poster & Raiben Jackpot Winner
    Joined
    Oct 13, 2013
    Messages
    5,140
    Reaction score
    1,365
    • Legacy Citizen 8
    • Thinking Positive
    • Purchased!
    Excited for this :)
    Holy shit I thought you were dead.


    Meaning blocks would change rotation depending from what angle you're looking at?
    I see this work fine for single block rotation, but what happens if you need to place down a large amount of blocks of rotation
    and you need to rotate your camera several times in order to see/fill all the spots? Doesn't that mean your rotation would constantly change during that process?​
    Never bothered me when I built in Blockade Runner.
     

    Lancake

    Head of Testing
    Joined
    Aug 20, 2013
    Messages
    794
    Reaction score
    560
    • Schine
    • Tester
    Never bothered me when I built in Blockade Runner.
    Never played Blockade Runner and any footage I find is a bit old, but it looks like it's the same building method as the one used in From the Depths. I don't recall the latter having a X + Y + Z brush size for a detached mouse.

    And from that old footage, I can see that both Blockade Runner and From The Depths gives you orientations depending at which block face you're looking at, basically limiting you to 4 orientations of the 24 as their are 6 different faces. If there's no block, it uses a "fake" block in front of your camera which then also shows you the face depending on your camera rotation relative to the structure.

    As I asked in my previous post, how would the brush size + detached mouse work with this method of selecting your orientation?
    +
    Is that what you meant with "Dynamic to your POV"? I can only make assumptions here so if you can explain it a bit more, that would help a lot.
     
    • Like
    Reactions: MacThule
    Joined
    Aug 25, 2016
    Messages
    46
    Reaction score
    9
    Its kind of painful pressing do fill for each layer, and I really dont want to have to press it a million times to fill up large areas. Idk if this is intentional to prevent abuse of the fill tool but if thats why then theres not really any point in having a fill tool...please add some way to make it stay on until you turn it off/exit build mode
     
    • Like
    Reactions: Ithirahad

    Reilly Reese

    #1 Top Forum Poster & Raiben Jackpot Winner
    Joined
    Oct 13, 2013
    Messages
    5,140
    Reaction score
    1,365
    • Legacy Citizen 8
    • Thinking Positive
    • Purchased!
    Never played Blockade Runner and any footage I find is a bit old, but it looks like it's the same building method as the one used in From the Depths. I don't recall the latter having a X + Y + Z brush size for a detached mouse.

    And from that old footage, I can see that both Blockade Runner and From The Depths gives you orientations depending at which block face you're looking at, basically limiting you to 4 orientations of the 24 as their are 6 different faces. If there's no block, it uses a "fake" block in front of your camera which then also shows you the face depending on your camera rotation relative to the structure.

    As I asked in my previous post, how would the brush size + detached mouse work with this method of selecting your orientation?
    +
    Is that what you meant with "Dynamic to your POV"? I can only make assumptions here so if you can explain it a bit more, that would help a lot.
    I never had orientation issues in working experience but you are right about the options being somewhat more limited per your situation.
     

    kiddan

    Cobalt-Blooded Bullet Mirror
    Joined
    May 12, 2014
    Messages
    1,131
    Reaction score
    358
    • Top Forum Contributor
    • Legacy Citizen 4
    • Purchased!
    I'm having trouble finding the cargo transfer settings in the latest dev build. Got any clues? :-p
     

    Ithirahad

    Arana'Aethi
    Joined
    Nov 14, 2013
    Messages
    4,150
    Reaction score
    1,330
    • Purchased!
    • Top Forum Contributor
    • Legacy Citizen 8
    Its kind of painful pressing do fill for each layer, and I really dont want to have to press it a million times to fill up large areas. Idk if this is intentional to prevent abuse of the fill tool but if thats why then theres not really any point in having a fill tool...please add some way to make it stay on until you turn it off/exit build mode
    The maximum single fill step volume is probably low for testing purposes. I'd be surprised if it wasn't increased for release.
     

    StormWing0

    Leads the Storm
    Joined
    Jun 26, 2015
    Messages
    2,126
    Reaction score
    316
    • Community Content - Bronze 1
    hmm this should be interesting. schema any ideas when crew is going to come out? :-p

    Also you do realize if a build mode or advanced build mode tool seems too exploitable outside of a shipyard, just make it only usable in a shipyard or by an admin outside it. :)
     
    Joined
    Aug 25, 2016
    Messages
    46
    Reaction score
    9
    hmm this should be interesting. schema any ideas when crew is going to come out? :-p

    Also you do realize if a build mode or advanced build mode tool seems too exploitable outside of a shipyard, just make it only usable in a shipyard or by an admin outside it. :)

    NO THANKS!! This game doesnt have alot to do but I dont want to be forced to 'settle down" and make a station before I can make any real progress/designs. Not to mention how difficult it would be to make a miner by hand, try recreating your fav mining ships by hand right now to see what I mean. Also it would limit your ability to customize your ship on the fly and maker alterations because you would have to be settled down and have a base and everything. I would hate to see this but I can get where you are coming from because it makes it more realistic. But just go trying building something big by hand and see how tedious and slow that is. Maybe some hardcore players enjoy it and i enjoy making small ships by hand but anything larger than 40x40x40....no thanks! I dont find it fun at all.

    Ive said this like twice already in this post but go try recreating everything you have in your blueprints by hand and see how quickly you get bored. All your stations and all the first few ships you spawn to get started in a server. I think building by hand needs to be revamped though, you should be able to build and mine from longer distances. What do you think?
     

    kiddan

    Cobalt-Blooded Bullet Mirror
    Joined
    May 12, 2014
    Messages
    1,131
    Reaction score
    358
    • Top Forum Contributor
    • Legacy Citizen 4
    • Purchased!
    I feel like the fill tool needs a trade-off, but limiting it to shipyards doesn't sound right.
     
    Joined
    Jun 29, 2016
    Messages
    80
    Reaction score
    39
    both Blockade Runner and From The Depths gives you orientations depending at which block face you're looking at, [...] how would the brush size + detached mouse work with this method of selecting your orientation?
    In From the Depths myself and everyone I knew playing used the keyboard build mode, as it was way faster than building with a mouse. So orientation issues were never a problem, as in keyboard build mode you could still change the camera angle with your mouse to see whatever, but your active block was always 'attached' to the ship, so it didn't lose its orientation.

    Been a long time since I've played it, but that's how I remember it anyway.