Dan' Stargate ships Emporium

[Daniszen]

Added some detail to a section of the hull

 

[Reilly Reese]

Destiny's interior is difficult to get right, you may need to get creative unless you're okay with the plain brown

 

[Daniszen]

Destiny's interior is difficult to get right, you may need to get creative unless you're okay with the plain brown

Yeah, finding it somewhat dull atm too, exploring different flooring since I'm not sure about using the hull, but from what I can tell Destiny is mostly just 4, maybe 5 colours on the interior so there will have to be some extremely creative solutions here so it doesn't look just you know brown and depressing.
Unfortunately, some of the ceilings are literally just the exterior hull, which is why I'm just using brown armour for all the ceilings.

Been using pipes a bit more, really liked the aesthetic for the Destiny since you can see a bunch of pipe things all over the place there in certain rooms

Here's what I currently have planned for the crew quarters, but man oh man is it going to be CANCER to make them because of how they need to fit with the hull and such, since the hull is at such an angle and all. You may also notice the 2 block wide door leading into the room, so I might have to make a slimmer corridor which may help break up the interiors a bit and to make it easier to know where you are.

Also considering switching the floors to tekt, but idk I feel it would look a bit weird in places

 

[Daniszen]

Made several small power relay rooms, in an attempt to start filling those endless hallways with things

Tried getting to the new areas I added in astronaut mode but kept getting lost

Anyway here's another control room, let's say this one has something to do with the shields

And here are some exposed cables tying into the power couplings and shield emitters, one of those shield emitters I made that's on rails is right behind that wall of red for extra RP

More power coupling connected directly to the shield emitters, there's one behind this wall aswell

[doublepost=1564937411,1564937122][/doublepost]Also just remembered that I need to connect this docking port to the rest of the internals

That'll be fun...

 

[Reilly Reese]

You should be able to make the ceilings not the exterior by just slapping on details or slabs on the exterior in those areas, or alternatively reposition the rooms themselves.

The girders, activation gates and blue conduits all have varied and useful tops which can be used to make a more diverse flooring as well.

 

[Daniszen]

Tried out some different flooring, unfortunately, though some of them looked nice because of how the ship is largely lit via underfloor lighting it ends up looking strange and out of place almost

Might use girders for the hallways though but not in any rooms

These could've worked but again the lights make them look strange

If only they were orange...

In conclusion, I think I will stick with the brown armour for most rooms

 

[Daniszen]

Made some claustrophobic hallways to get to the docking port at the front of the ship

Went for a more yellow colour scheme for these hallways
[doublepost=1565017723,1565017190][/doublepost]How come no one has told me about the Fill tool??

This has changed my life in ways I still cannot even begin to fathom...
[doublepost=1565018059][/doublepost]Look how solid it is in the nose

I will fill this whole thing with internals and stabiliser

 

[Reilly Reese]

Tried out some different flooring, unfortunately, though some of them looked nice because of how the ship is largely lit via underfloor lighting it ends up looking strange and out of place almost
View attachment 54319
Might use girders for the hallways though but not in any rooms
View attachment 54320
These could've worked but again the lights make them look strange
View attachment 54321
If only they were orange...

In conclusion, I think I will stick with the brown armour for most rooms

The solution is display modules, they have plain sides and tops that are identical to girders

 

[Daniszen]

Made a hydroponics lab

The solution is display modules, they have plain sides and tops that are identical to girders

Tried the monitors, unfortunate that that whole text thing pops up, but I also realised I could've just flipped the activation gate over so the ugly side faces down

So I'll use that for floors pretty much everywhere from now on, except hallways because it will mess up all the stairs and that is a headache I'd rather not have right now
[doublepost=1565028622,1565027692][/doublepost]Touched up the core room with some more lights, fans and consoles

 

[Daniszen]

Started work on a seedship

I think I may have overdone the curved wing section by a fraction, but that's okay

 

[Daniszen]

Took some doing, but now they can dock

Barely...

Honestly not even sure I'm happy with the thing but docking it onto The Destiny felt nice

 

[Daniszen]

Made an Asgard ship earlier today, just finished the exterior and I'm planning on doing the interior as well.

It's quite small, at only 174 meters long and 145 meters wide, most of the rear is dedicated to reactor chambers, shields, cannons and thrusters, but towards the front there's a decent amount of space for internals
[doublepost=1565115311,1565113642][/doublepost]I'm also working on the O'Neil, but it's slow going tbh, keep disagreeing whether or not I got the shape wrong.

 

[Reilly Reese]

Mini-Daniel Jackson

 

[Daniszen]

Created an Anti-Replicator weapon

It doesn't really do anything except fire a push pulse thing, which has a resemblance to the energy wave the ARW has in the show

 

[Daniszen]

Started on a Belskirnir-Class Mothership today

It does, however, seem like the O'Neil is too small atm, so I guess I'll have to make it larger
[doublepost=1565212685,1565212436][/doublepost]

[doublepost=1565215804][/doublepost]Now it's all covered up

 

[Reilly Reese]

Yeah, the actual O'neill is something like 2 kilometers when compared to Prometheus iirc

 

[Daniszen]

Today I'm upgrading the Auroras Shields, 43 750 000 ain't enough, that's only 3-5 shots with a full charge from the Belskinir ion-cannon

 

[Daniszen]

Shield strength now at 170 250 004 (where in the hell did that rogue 4 come from??)

 

[Daniszen]

Added two point-defence cannons to the Belskirnir, don't want to get boarded by filthy replicators

 

[Daniszen]

Pretty much done with the exterior of the Belskirnir, just a few minor additions before starting on the detailing and the interior