Dan' Stargate ships Emporium

    The lights are...

    • Too dim

      Votes: 0 0.0%
    • Too blue

      Votes: 0 0.0%
    • Not blue enough

      Votes: 0 0.0%
    • Sometimes not blue enough

      Votes: 0 0.0%
    • Sometimes too dim and too blue

      Votes: 0 0.0%
    • Sometimes too dim, but not blue enough

      Votes: 0 0.0%
    • Sometimes too dim, but otherwise fine

      Votes: 1 50.0%
    • Fine

      Votes: 1 50.0%

    • Total voters
      2
    • Poll closed .

    Reilly Reese

    #1 Top Forum Poster & Raiben Jackpot Winner
    Joined
    Oct 13, 2013
    Messages
    5,140
    Reaction score
    1,365
    • Legacy Citizen 8
    • Thinking Positive
    • Purchased!
    Destiny's interior is difficult to get right, you may need to get creative unless you're okay with the plain brown
     
    • Like
    Reactions: Daniszen
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Destiny's interior is difficult to get right, you may need to get creative unless you're okay with the plain brown
    Yeah, finding it somewhat dull atm too, exploring different flooring since I'm not sure about using the hull, but from what I can tell Destiny is mostly just 4, maybe 5 colours on the interior so there will have to be some extremely creative solutions here so it doesn't look just you know brown and depressing.
    Unfortunately, some of the ceilings are literally just the exterior hull, which is why I'm just using brown armour for all the ceilings.
    starmade-screenshot-3169.png
    starmade-screenshot-3170.png
    Been using pipes a bit more, really liked the aesthetic for the Destiny since you can see a bunch of pipe things all over the place there in certain rooms
    starmade-screenshot-2984.png
    starmade-screenshot-2985.png
    Here's what I currently have planned for the crew quarters, but man oh man is it going to be CANCER to make them because of how they need to fit with the hull and such, since the hull is at such an angle and all. You may also notice the 2 block wide door leading into the room, so I might have to make a slimmer corridor which may help break up the interiors a bit and to make it easier to know where you are.
    starmade-screenshot-2942.png
    Also considering switching the floors to tekt, but idk I feel it would look a bit weird in places
     
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Made several small power relay rooms, in an attempt to start filling those endless hallways with things
    starmade-screenshot-3176.png
    Tried getting to the new areas I added in astronaut mode but kept getting lost
    starmade-screenshot-3177.png
    Anyway here's another control room, let's say this one has something to do with the shields
    starmade-screenshot-3178.png
    And here are some exposed cables tying into the power couplings and shield emitters, one of those shield emitters I made that's on rails is right behind that wall of red for extra RP
    starmade-screenshot-3179.png
    More power coupling connected directly to the shield emitters, there's one behind this wall aswell
    starmade-screenshot-3180.png
    [doublepost=1564937411,1564937122][/doublepost]Also just remembered that I need to connect this docking port to the rest of the internals
    starmade-screenshot-3181.png
    That'll be fun...
    starmade-screenshot-3182.png
     
    • Like
    Reactions: MrGrey1

    Reilly Reese

    #1 Top Forum Poster & Raiben Jackpot Winner
    Joined
    Oct 13, 2013
    Messages
    5,140
    Reaction score
    1,365
    • Legacy Citizen 8
    • Thinking Positive
    • Purchased!
    You should be able to make the ceilings not the exterior by just slapping on details or slabs on the exterior in those areas, or alternatively reposition the rooms themselves.

    The girders, activation gates and blue conduits all have varied and useful tops which can be used to make a more diverse flooring as well.
     
    • Like
    Reactions: Daniszen
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Tried out some different flooring, unfortunately, though some of them looked nice because of how the ship is largely lit via underfloor lighting it ends up looking strange and out of place almost
    starmade-screenshot-3188.png
    Might use girders for the hallways though but not in any rooms
    starmade-screenshot-3189.png
    These could've worked but again the lights make them look strange
    starmade-screenshot-3190.png
    If only they were orange...

    In conclusion, I think I will stick with the brown armour for most rooms
     
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Made some claustrophobic hallways to get to the docking port at the front of the ship
    starmade-screenshot-3192.png
    starmade-screenshot-3193.png
    starmade-screenshot-3194.png
    starmade-screenshot-3195.png

    starmade-screenshot-3196.png
    Went for a more yellow colour scheme for these hallways
    [doublepost=1565017723,1565017190][/doublepost]How come no one has told me about the Fill tool??
    starmade-screenshot-3197.png
    This has changed my life in ways I still cannot even begin to fathom...
    [doublepost=1565018059][/doublepost]Look how solid it is in the nose
    starmade-screenshot-3198.png
    I will fill this whole thing with internals and stabiliser
     
    • Like
    Reactions: MrGrey1

    Reilly Reese

    #1 Top Forum Poster & Raiben Jackpot Winner
    Joined
    Oct 13, 2013
    Messages
    5,140
    Reaction score
    1,365
    • Legacy Citizen 8
    • Thinking Positive
    • Purchased!
    Tried out some different flooring, unfortunately, though some of them looked nice because of how the ship is largely lit via underfloor lighting it ends up looking strange and out of place almost
    View attachment 54319
    Might use girders for the hallways though but not in any rooms
    View attachment 54320
    These could've worked but again the lights make them look strange
    View attachment 54321
    If only they were orange...

    In conclusion, I think I will stick with the brown armour for most rooms
    The solution is display modules, they have plain sides and tops that are identical to girders
     
    • Like
    Reactions: Daniszen
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Made a hydroponics lab
    The solution is display modules, they have plain sides and tops that are identical to girders
    Tried the monitors, unfortunate that that whole text thing pops up, but I also realised I could've just flipped the activation gate over so the ugly side faces down
    starmade-screenshot-3201.png
    starmade-screenshot-3202.png
    So I'll use that for floors pretty much everywhere from now on, except hallways because it will mess up all the stairs and that is a headache I'd rather not have right now
    [doublepost=1565028622,1565027692][/doublepost]Touched up the core room with some more lights, fans and consoles
    starmade-screenshot-3205.png
     
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Made an Asgard ship earlier today, just finished the exterior and I'm planning on doing the interior as well.
    starmade-screenshot-3223.png
    starmade-screenshot-3224.png
    It's quite small, at only 174 meters long and 145 meters wide, most of the rear is dedicated to reactor chambers, shields, cannons and thrusters, but towards the front there's a decent amount of space for internals
    [doublepost=1565115311,1565113642][/doublepost]I'm also working on the O'Neil, but it's slow going tbh, keep disagreeing whether or not I got the shape wrong.
    starmade-screenshot-3226.png
     
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Created an Anti-Replicator weapon
    starmade-screenshot-3259.png
    It doesn't really do anything except fire a push pulse thing, which has a resemblance to the energy wave the ARW has in the show
     
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Started on a Belskirnir-Class Mothership today
    starmade-screenshot-3267.png
    starmade-screenshot-3268.png

    starmade-screenshot-3269.png
    It does, however, seem like the O'Neil is too small atm, so I guess I'll have to make it larger
    [doublepost=1565212685,1565212436][/doublepost] starmade-screenshot-3270.png
    [doublepost=1565215804][/doublepost]Now it's all covered up
    starmade-screenshot-3272.png
    starmade-screenshot-3274.png
     
    • Like
    Reactions: MrGrey1

    Reilly Reese

    #1 Top Forum Poster & Raiben Jackpot Winner
    Joined
    Oct 13, 2013
    Messages
    5,140
    Reaction score
    1,365
    • Legacy Citizen 8
    • Thinking Positive
    • Purchased!
    Yeah, the actual O'neill is something like 2 kilometers when compared to Prometheus iirc
     
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Today I'm upgrading the Auroras Shields, 43 750 000 ain't enough, that's only 3-5 shots with a full charge from the Belskinir ion-cannon
     
    Joined
    Jan 11, 2015
    Messages
    269
    Reaction score
    304
    • Legacy Citizen 8
    • Community Content - Bronze 1
    Shield strength now at 170 250 004 (where in the hell did that rogue 4 come from??)
    starmade-screenshot-3277.png