A large 8 part door for entrance into a hangar. The speed and activation button are located behind the core (where the logic line connect) for you to move as needed. Feel free to make a template and use in your station.
The door and rails systems are only 2 layers thick, meaning your hull doesn't have to be greatly modified but it does require a good deal of room to place the open door parts. Note that there is an open hole/block in the center, you can add the piece as desired or use a logic controlled 'plex door'.
There are no DELAY circuits used to make this more server reliable and the sloped surface will help in the event of lag jams.
This is was the 1st step to a future 8 part iris door I'm working on.
Give it a rating if you find it useful.
The door and rails systems are only 2 layers thick, meaning your hull doesn't have to be greatly modified but it does require a good deal of room to place the open door parts. Note that there is an open hole/block in the center, you can add the piece as desired or use a logic controlled 'plex door'.
There are no DELAY circuits used to make this more server reliable and the sloped surface will help in the event of lag jams.
This is was the 1st step to a future 8 part iris door I'm working on.
Give it a rating if you find it useful.
