DEACTIVATED; Stand by for shipyard revamp
Hello everyone, I thought it was about time I started to post the ships I have made. If my shipyard turns out the way I want it, there will be ships from a few different space movies/ games (Halo, Star Wars, Firefly, etc.) and also my own custom ships.
In the past few weeks I discovered that I had blueprints from the old site still on my computer, dating from as far back as when I began playing. I plan on stripping the ships of their systems, fixing them up and re-uploading them. I will give as much credit as I can to the previous builders. I do not plan on using Smedit or stealing others creations,
lets get started shall we?
Tortoise Download- Tortoise
[UPDATE: This ship has to be refitted for the new rails update]
Dagger Corvette III Download: Dagger Corvette III
[UPDATE: This ship has to be refitted for the new rails update]
Front View.
Hawk-class Fighter Download:Hawk-class Fighter
[UPDATE: Ship is being redesigned for the rails update]
Front View
Owl-Class Scout Download-Owl-Class Scout
[UPDATE: Ship is being redesigned for the rails update]
More updates will be coming. And possibly more and more common after I get my finals done and possibly have other people helping me.
Latest update is on page three
More will come as i get around to it.
Feel free to message me with ship ideas or suggestions. If you want to use these ships as part of your server, or modify them please message me. Any reuploads of my ships is highly discouraged and please message me if you do happen to stumble on a reupload.
Hello everyone, I thought it was about time I started to post the ships I have made. If my shipyard turns out the way I want it, there will be ships from a few different space movies/ games (Halo, Star Wars, Firefly, etc.) and also my own custom ships.
In the past few weeks I discovered that I had blueprints from the old site still on my computer, dating from as far back as when I began playing. I plan on stripping the ships of their systems, fixing them up and re-uploading them. I will give as much credit as I can to the previous builders. I do not plan on using Smedit or stealing others creations,
lets get started shall we?
Recently I found the 'turtle' built by GamingWithSaber. I found it on the turtle's one year anniversary. Inspired by the Turtle I created the Tortoise and tried to copy what Saber did but give it my own touch.
The largest transport vessel made, the Tortoise is used to move large frigates and fighters. On the rare occasion it can also be used as a carrier to move light corvettes and fighters into battle. Known for its speed, The Tortoise can travel at max speed on most servers allowing heavier slower ships to be brought to battles quickly. The large hangar can also support many fighter-craft allowing for large amounts of ships to be brought to battle. Although the Tortoise is armed with turrets it is not designed to be a front-line battleship.
- Length 320 meters - Height 59 meters -Width 145 meters]
The largest transport vessel made, the Tortoise is used to move large frigates and fighters. On the rare occasion it can also be used as a carrier to move light corvettes and fighters into battle. Known for its speed, The Tortoise can travel at max speed on most servers allowing heavier slower ships to be brought to battles quickly. The large hangar can also support many fighter-craft allowing for large amounts of ships to be brought to battle. Although the Tortoise is armed with turrets it is not designed to be a front-line battleship.
- Length 320 meters - Height 59 meters -Width 145 meters]
[UPDATE: This ship has to be refitted for the new rails update]
Dagger Corvette III. The newest in a series of light corvettes. The ship uses the same hull as the Dagger Corvette II but was completely gutted to make room for the newest advances in technology. Well built and heavily armed the Dagger III is dependable as a light corvette class ship.
-Length 117 meters - Height 27 meters - Width 33 meters
-Length 117 meters - Height 27 meters - Width 33 meters
Dagger Corvette III Download: Dagger Corvette III
[UPDATE: This ship has to be refitted for the new rails update]
Hawk class heavy-fighter. Armed with dual laser cannons the Hawk is known for its speed and fire power. The Hawk can travel at max speed and models can be equipped with an aftermarket overdrive. It is recommended to travel in numbers and to be part of a fleet.
-Length 26 meters -Height 12 meters-Width 27 meters
-Length 26 meters -Height 12 meters-Width 27 meters
Front View.
[UPDATE: Ship is being redesigned for the rails update]
The Owl is an unarmed scout ship relying on its small size, speed and pilots skill to get home safely. The Owl is equipped with an overdrive allowing it to achieve speeds higher then the max speed.
-Length 19 meters - Height 9 meters - Width 19 meters
-Length 19 meters - Height 9 meters - Width 19 meters
Front View
[UPDATE: Ship is being redesigned for the rails update]
It's taken way longer than i thought it would but now i can finally upload pictures of my Carrier WIP. A few of you may know that i was hinting at what it was, or cursing at the ship when something went wrong. The WIP has been rather quite interesting, with doors docking sideways, upside down, even 25 km infront of the ship itself. I had to completely repaste the ship on to a new core where the ship core wasn't in the middle of the ship's main hangar. I also had to modify the hull so the doors would open and close and not get stuck.
But enough with that. Down below this post i reveal my Carrier WIP. Yes to you Star Wars fans, it is going to be a fully functional, full scale, RP, Clone Wars ship. The ship that i have been stumbling through for about a month is, of course, the legendary Venator Class Star Destroyer.
Front View [The picture makes the ship look extremely narrow]
Full Top View
Full Bottom View
Full Side View
Full Rear View
[There will be more pictures added to this list eventually]
The Ship is 1137 meters long, by 268 meters high, and 547 meters wide. The ships current mass [Without Interior] weighs in at 153645.1 mass and 1290959 blocks.
Please note that i did not build most of this ship's exterior. The parts that i did not have to modify were built by the currently inactive member El_Poulpy and a link to his exterior of the ship is down below The ship currently has no interior to speak of, nor have i gotten around to update the ships turrets.
More WIP updates will come.
[UPDATE: Progress has increased]
But enough with that. Down below this post i reveal my Carrier WIP. Yes to you Star Wars fans, it is going to be a fully functional, full scale, RP, Clone Wars ship. The ship that i have been stumbling through for about a month is, of course, the legendary Venator Class Star Destroyer.
Front View [The picture makes the ship look extremely narrow]
Full Top View
Full Bottom View
Full Side View
Full Rear View
[There will be more pictures added to this list eventually]
Please note that i did not build most of this ship's exterior. The parts that i did not have to modify were built by the currently inactive member El_Poulpy and a link to his exterior of the ship is down below The ship currently has no interior to speak of, nor have i gotten around to update the ships turrets.
More WIP updates will come.
[UPDATE: Progress has increased]
Progress update #2: Bridge Overhaul
I spent the majority of yesterday working on the command bridges of the Venator. I spent a lot of time smoothing out the bridges with rails (and still haven't done everything) and expanded a part of it outwards so it wouldn't be completely flat and boring. I also made the bridge part of the tower, with more interior work to go.
The bottom, top, and sides of the bridge have been rounded with edges (they used to be completely flat)
Both bridges (I am going to redo the bottom rounding part of the bridges)
A glimpse at the interior of the bridge
Top view of the ship (The part that extends outwards close to the front of the ship is some of the work i did. It used to be completely straight from the front to close to the back)
[Edit: realized that the line above was incomplete]
I will start work on the main hangar of the ship soon.
Until next time.
-awesome270
I spent the majority of yesterday working on the command bridges of the Venator. I spent a lot of time smoothing out the bridges with rails (and still haven't done everything) and expanded a part of it outwards so it wouldn't be completely flat and boring. I also made the bridge part of the tower, with more interior work to go.
The bottom, top, and sides of the bridge have been rounded with edges (they used to be completely flat)
Both bridges (I am going to redo the bottom rounding part of the bridges)
A glimpse at the interior of the bridge
Top view of the ship (The part that extends outwards close to the front of the ship is some of the work i did. It used to be completely straight from the front to close to the back)
[Edit: realized that the line above was incomplete]
I will start work on the main hangar of the ship soon.
Until next time.
-awesome270
More updates will be coming. And possibly more and more common after I get my finals done and possibly have other people helping me.
Latest update is on page three
More will come as i get around to it.
Feel free to message me with ship ideas or suggestions. If you want to use these ships as part of your server, or modify them please message me. Any reuploads of my ships is highly discouraged and please message me if you do happen to stumble on a reupload.
Last edited: