AEquilibrium's SpaceShips Works

    Joined
    Apr 7, 2016
    Messages
    3
    Reaction score
    4
    Decided to start sharing my builds just to add content to the community and also receive feedback from you guys!
    Here is my newly recorded video on the process (i.e. struggle) to continue the build Tshara rewied, let me know what you think about it!

    P.s. i tryed so hard to keep it short, i will do better in the future i promise!
    Just finished the SD upload, HD will come soon enough

     
    Last edited:
    Joined
    Sep 29, 2013
    Messages
    412
    Reaction score
    1,514
    • Master Builder Silver
    • Competition Winner - Small Fleets
    • Legacy Citizen 8
    Loved the update vid. We need more Star Made content. It’s exactly the reason I started uploading as well. I haven’t had too much time looking at the new version of the ship but I’m liking what I’ve seen so far. Going on a short trip so I’m probably looking at this again when I’m back.
     
    • Like
    Reactions: docpenguindoc
    Joined
    Sep 29, 2013
    Messages
    412
    Reaction score
    1,514
    • Master Builder Silver
    • Competition Winner - Small Fleets
    • Legacy Citizen 8
    As for the wings. The best way to handle it I think is to cut every distinctive part of the wing design in parts. Design each part separately but in a way that thy can connect to each other.

    Think of it as if the shipyard is building this ship and the wing comes in 3 sections and they have to weld it together.

    Can apply to other parts of the ship as well.

    Your vids comments are turned off by the way. You might want to look at that.
     
    • Like
    Reactions: docpenguindoc
    Joined
    Apr 7, 2016
    Messages
    3
    Reaction score
    4
    I just changed youtube's settings to allow comment without review, it shoud be possible to do it now. I'll try out your suggestion for the wings, let's see where it brings me :)
     
    • Like
    Reactions: docpenguindoc
    Joined
    Oct 23, 2013
    Messages
    76
    Reaction score
    184
    • Community Content - Bronze 1
    • Legacy Citizen 6
    Love how the ship is coming out!
    Reminds me of the Andorian vessels from Star Trek



    As far as feedback;

    It might be possible to incorporate the existing red stripes on the hull, for the missile launchers, to thicken the strips
    Could also use a trapezoid profile to appear more aerodynamic/reduce bulkiness.
    1663732927308.png

    No ideas stuck out to me for the nose section.
    Possibly a trench across the center like the above Andorian ship, with a deflector dish on the slope like below (left)?
    1663733452948.png
    I'm not sure how well that would translate to StarMade however.


    Regardless, I always love seeing more StarMade content out there!
     
    • Like
    Reactions: AEquilibrium