Starmade Wont Start Up

    Joined
    Dec 24, 2013
    Messages
    2
    Reaction score
    0
    • Legacy Citizen
    My starmade lauches to the point to where i could chose singleplayer or multiplayer but if I try to load up single player it just says "conecting to localhst: 4242" and wont load. I waited 5 hours and it still didnt do anything. please help!
     
    Joined
    Aug 30, 2013
    Messages
    199
    Reaction score
    14
    What have you attempted to do to resolve this situation? Have you tried a restart (of computer) yet?
     
    Joined
    Sep 9, 2013
    Messages
    68
    Reaction score
    10
    • Legacy Citizen 3
    You must wait 6 hours before it will work. If that doesn\'t work, defrag and then reinstall starmade after rebooting your computer twice. (Once after the defrag, and again after uninstalling starmade). If that still doesn\'t work then clearly your device driver has failed to comply with the PCU and the FSB is insuffecient for the amount of ram you have. You\'ll need to \"Flash\" your ram, you do this by powering down your computer, pulling out the ram, and then putting it back in. Before you load windows again; open your BIOS setup by holding F12 when turning on your computer. ENSURE THE CLOCK IS SET CORRECTLY! - BIOS is inherently buggy, and if the clock isn\'t right all sorts of things can go wrong in the BIOS. Good luck!