The Corellian CR90 Corvette is perhaps the most iconic ship in the Star Wars universe. The most common variation being the CR70 conversion to the CR90 standard know as the Tantive IV. I built this wanting something a little different than the Tantive IV since it's seen everywhere and redone by everyone. I eventually ran across a thread on a 3d modeling site with an eye-popping model.
http://www.scifi-meshes.com/forums/showthread.php?76407-Modified-Corellian-CR90
I used that to make my starmade version. I worked hard to make this model as detailed as I could, sadly I couldn't do the original author's model justice. But I'm quite happy with the results I've gotten.
Before you download, keep in mind this is a shell version. Meaning it's just the exterior, decks (no rooms), and basic systems. I'm currently working on the phase 2, with the finished interior and subsystems. Phase 3 will have the turrets. I plan on making multiple color variations, each with the 3 phases, which I will post here. If possible I will zip them together to make 1 easy download.
This model is good for people that are looking for something they can touch up themselves. I put a lot of time into the exterior, but I'm sucky with interior stuff, that's why the interior is unfinished in this model.
I filled most of the little spaces, most of what's left is the large spaces used for the living space. However, most of the engineering block is free.
Current stats as it sits are;
Length 165 width 53 height 33
mass approx 8500
power regen 1,002,052.5
Thrust 10,108.5
turning speed x1.4 y1.7 z1.1
shields approx 109,500
shield recharge approx 10,700
Basic systems installed;
overdrive
jump drive
I hope everyone enjoys!
http://www.scifi-meshes.com/forums/showthread.php?76407-Modified-Corellian-CR90
I used that to make my starmade version. I worked hard to make this model as detailed as I could, sadly I couldn't do the original author's model justice. But I'm quite happy with the results I've gotten.
Before you download, keep in mind this is a shell version. Meaning it's just the exterior, decks (no rooms), and basic systems. I'm currently working on the phase 2, with the finished interior and subsystems. Phase 3 will have the turrets. I plan on making multiple color variations, each with the 3 phases, which I will post here. If possible I will zip them together to make 1 easy download.
This model is good for people that are looking for something they can touch up themselves. I put a lot of time into the exterior, but I'm sucky with interior stuff, that's why the interior is unfinished in this model.
I filled most of the little spaces, most of what's left is the large spaces used for the living space. However, most of the engineering block is free.
Current stats as it sits are;
Length 165 width 53 height 33
mass approx 8500
power regen 1,002,052.5
Thrust 10,108.5
turning speed x1.4 y1.7 z1.1
shields approx 109,500
shield recharge approx 10,700
Basic systems installed;
overdrive
jump drive
I hope everyone enjoys!
