The factory measures only 72x41x112m and its main production specs are:
-1.2k refinery, 300x smelter
-500x each shield block
-100x each weapon/effect module
-500x each colour of T1 hull and 250x for shapes
Warp Gate specs: WG2821250
-280x210m gate
-6 gates
-1.2M mass maximum
-Computers in the control room
With the warp gate it measures 1148Lx433Hx306W meaning a sector size above 3km is recommended. There are 235k blocks on it, so it should be light on lower power machines.
The factory is NOT updated to the new cargo system so it is required to place cargo blocks on the base to have the capacity, scalability is easy, it is only adding extra modules to the empty inner area.(the warp gate itself is empty inside for scalability, in case its size gets increased)
The production chain is meant for only T1 hull since i do not use T2 and T3 hull so users of those hulls and coloured glass will have to add factory blocks on the factory floor available areas.
Its features are barebones to keep size small for quick access to its useful contents so modifications with decoration might impact the usefulness of the factory and its warp gate.
The blue warp gate destination coordinate display are the functioning second version of them to reduce implementation time(at the time i was installing and connecting around 2 warp gates per day), it is recommended to copy the implementation to the other gates(the side with more activation modules are to be removed since they do not have functionality), but for casual users the first version(not backlit) is probably a better choice(faster than implementing on the other 5 gates)
First design of the factory goes back to around may-september 2014