You must wait 6 hours before it will work. If that doesn\'t work, defrag and then reinstall starmade after rebooting your computer twice. (Once after the defrag, and again after uninstalling starmade). If that still doesn\'t work then clearly your device driver has failed to comply with the PCU and the FSB is insuffecient for the amount of ram you have. You\'ll need to \"Flash\" your ram, you do this by powering down your computer, pulling out the ram, and then putting it back in. Before you load windows again; open your BIOS setup by holding F12 when turning on your computer. ENSURE THE CLOCK IS SET CORRECTLY! - BIOS is inherently buggy, and if the clock isn\'t right all sorts of things can go wrong in the BIOS. Good luck!